Integration examples

Remote ID

First of all, the internal Remote ID of the Veronte Autopilot 1x has to be configured. This section details how to do it:

1. Open Veronte Updater → go to Remote ID tab → select Configure Remote ID option:

   Note

   First, it is necessary to log in to the CLS.

   

2. Select the unit and Veronte Updater will load the internal Remote ID information from the connected device:

   

3. Once the information has been loaded, users must configure the 4 different settings:

   • UAV Identification
   • UAV Description
   • UAV Classification
   • UAV Operator ID

   

   For detailed information on these settings, please refer to the Configure Remote ID - Operation section of this manual.

4. Once the configuration is complete, click Configure to start the process.